Configuring the Processor

When starting a project for the first time, check and make sure the OFFLINE/ONLINE window (upper left side, below row of icons) displays "No Controller". From the menu bar select File | New, or click on the paper sheet icon. If you are prompted to close the current project, select Yes. A window titled "New Controller" is displayed.

Select the proper processor type in the first field, which should be:
- 1756-L61 ControlLogix 5561 Controller
- Select the proper revision level, 18.
- Type in a controller name.
- Select the proper chassis type (7- or 10-slot) and slot for the processor (probably "0").
- Select the proper directory in which the project will be saved (Should be
- "C:\Projects\RSLogix 5000").
- Click on OK.

The project data bases will be created. A project window and a large blank area will appear.

If in the G-22 lab, set up project communications. (If not in the G-22 lab, do this step before you download the program for the first time.) On the main menu bar, select Communications | Who Active. Click on "+" box next to "AB_DF1-1" since the processor is connected with a serial cable to the PC. Select the line with "1756-L61 LOGIX5561" or "1756-L63 LOGIX5563". Check box "Set Project Path". Click on Apply. Click on Close.

You are now ready to configure the I/O channels. The OFFLINE/ONLINE window displays "Offline".