Processor Channel Configuration
For the processor, the baud rate of the serial port must be set to match the baud rate in the RSLogix communication configuration.
Right-click on the Controller (top line) folder in the project tree window.
Select Properties
Select the Serial Port tab
Make sure the baud rate is 19200.
Click on OK when finished.
Now the processor needs to be downloaded with the blank ladd.
Right-click on the Controller (top line) folder in the project tree window.
Select Properties
Select the Serial Port tab
Make sure the baud rate is 19200.
Click on OK when finished.
Now the processor needs to be downloaded with the blank ladd.
0 comments :